Serial Peripheral Interface (S12SPIV5)
MC9S12G Family Reference Manual Rev.1.27
NXP Semiconductors 717
21.4.7.5.2 SPIF
SPIF occurs when new data has been received and copied to the SPI data register. After SPIF is set, it does
not clear until it is serviced. SPIF has an automatic clearing process, which is described in Section 21.3.2.4,
“SPI Status Register (SPISR)”.
21.4.7.5.3 SPTEF
SPTEF occurs when the SPI data register is ready to accept new data. After SPTEF is set, it does not clear
until it is serviced. SPTEF has an automatic clearing process, which is described in Section 21.3.2.4, “SPI
Status Register (SPISR)”.
To Next Page
Loading...
Need help?
General
