3
Basic copy operations
3-84 CS193/CS173/CS163
3.17 Deleting a paused job
Follow the procedure described below to delete a temporarily stopped job.
0 For details on temporarily stopping a job being scanned or printed, refer to "Temporarily stopping
scanning/printing" on page 3-83.
0 Select only one job at a time to be deleted.
0 To continue a temporarily stopped job, press the [Start] key.
1 Press the [Stop] key while an original is being scanned or a job
is being printed.
Scanning/printing stops.
The Stopped Jobs screen appears.
2 Select the job to be deleted, and then touch [Delete].
The selected job is deleted.
To Next Page
Loading...
