Oce CS193 - Operations Where the Setting Specified First Is Given Priority

CS193/CS173/CS163 3-7
Basic copy operations
3
The "2 Position" Staple setting is automatically canceled, and the "Booklet" function is set.
To select the "2 Position" Staple setting, cancel the "Booklet" function, and then select the "2 Position"
setting.
3.2.2 Operations where the setting specified first is given priority
If a warning message appears, indicating that settings cannot be combined, those settings cannot be
specified together.
The procedure for selecting the "2 Position" Staple setting after setting the "Booklet" function is described
below.
1 Set the "Booklet" function.
2 Select the "2 Position" Staple setting.
The message "Cannot be set with Booklet." appears and the "2 Position" Staple setting cannot be
selected.
The "Booklet" function remains selected and the "2 Position" Staple setting is canceled.
To select the "2 Position" Staple setting, cancel the "Booklet" function, and then select the "2 Position"
Staple setting.