CS193/CS173/CS163 8-81
Application functions
8
– To specify the text size, touch [Text Size], and then select the size.
7 Touch [OK], and then touch [Close] in the next screen that appears.
8 Specify any other desired copy settings.
– To cancel the setting and select the default, press the [Reset] key.
9 Using the keypad, type in the desired number of copies.
10 Press the [Start] key.
8.20.2 Printing the page number ("Page Number" function)
1 Position the original to be copied.
– For details on positioning the original, refer to "Feeding the original" on page 3-8.
2 Touch [Application], and then touch [Stamp/Composition].
– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
The Stamp/Composition screen appears.
To Next Page
Loading...
