Oce CS193 - Scanning a Multi-Page Original from the Original Glass

CS193/CS173/CS163 3-15
Basic copy operations
3
3.3.4 Scanning a multi-page original from the original glass
When making double-sided or combined copies using the original glass, place each page of a multi-page
original on the original glass to scan it. The following procedure describes how to place single-sided original
pages on the original glass to make double-sided copies.
0 The output method used with the "Separate Scan" setting can be set to "Page Print" or "Batch Print".
As a default, "Page Print" is selected.
0 For details on the output method used with the "Separate Scan" setting, refer to "Copier Settings" on
page 12-18.
1 Lift open the ADF or the original cover.
2 Position the first page or the first side of the original face down onto the original glass.
– For details on positioning the original, refer to "Placing the original on the original glass" on
page 3-9.
3 Close the ADF or the original cover.
4 In the Basic screen, touch [Duplex/Combine].
The Duplex/Combine screen appears.
20° 20°
When loaded in the v orientation When loaded in the w orientation