Oce CS193 - Printing Previously Registered Stamps (Stamp Function)

CS193/CS173/CS163 8-85
Application functions
8
– To specify the text size, touch [Text Size], and then select the size.
8 Touch [OK], and then touch [Close] in the next screen that appears.
9 Specify any other desired copy settings.
– To cancel the setting and select the default, press the [Reset] key.
10 Using the keypad, type in the desired number of copies.
11 Press the [Start] key.
8.20.3 Printing previously registered stamps ("Stamp" function)
1 Position the original to be copied.
– Use the Copy Protection Utility to register a registered stamp. For details on registering stamps,
refer to the manual of the Copy Protection Utility.
– For details on positioning the original, refer to "Feeding the original" on page 3-8.
2 Touch [Application], and then touch [Stamp/Composition].
– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
The Stamp/Composition screen appears.