Oce CS193 - Operations that Cannot be Combined; Operations Where the Setting Specified Last Is Given Priority

3
Basic copy operations
3-6 CS193/CS173/CS163
3.2 Operations that cannot be combined
Certain copy settings cannot be used together.
Specifying settings that cannot be combined will result in one of the following occurring.
- The setting specified last is given priority. (The setting specified first is canceled.)
- The setting specified first is given priority. (A warning message appears.)
3.2.1 Operations where the setting specified last is given priority
The procedure for setting the "Booklet" function after selecting the "2 Position" Staple setting is described
below.
1 Select the "2 Position" Staple setting.
2 Set the "Booklet" function.