Oce CS193 - Setting the Key Repeat Start;Interval Time Functions

CS193/CS173/CS163 4-23
Additional copy operations
4
4.7.3 Setting the Key Repeat Start/Interval Time functions
The length of time until the value begins to change after a touch panel button is held down and the length of
time for the value to change to the next number can be specified.
0 The settings specified for the Key Repeat Start/Interval Time functions are only applied in the Enlarge
Display mode.
1 Display the Accessibility Setting screen.
– For details on displaying the Accessibility Setting screen, refer to "Displaying the Accessibility
Setting screen" on page 4-21.
2 Touch [Key Repeat Start/Interval Time] or press the [2] key in the keypad.
The Key Repeat Start/Interval Time screen appears.
3 Touch [+] and [-] to specify the starting time and the interval for the key repeat feature.