CS193/CS173/CS163 5-51
Troubleshooting
5
5 Raise the shutter of the staple cartridge holder, and then pull
out one sheet of staples.
6 Return the shutter of the staple cartridge holder to its original position.
7 Insert the staple cartridge holder, sliding it along the rails in the
compartment.
– Check that the staple cartridge holder is securely inserted
as far as possible.
8 Close the front door.
2
Reminder
If stapling still cannot be resumed, even after performing the above procedure, contact your service
representative.
To Next Page
Loading...
