Oce CS193 - Page 340

8
Application functions
8-60 CS193/CS173/CS163
?
Can sizes in inches be displayed?
% Touch or to display a different list of sizes.
?
Can any size be specified?
% Any size can be specified from the Custom Size screen. Touch [X] or [Y] to select the dimension,
and then use the keypad to specify the correct value. (To enter a value, press the [C] (clear) key, and
then use the keypad to type in the new value.)
?
What happens when a value outside of the allowable range is specified?
% The message "Input error" appears. If "Input error" appears or if the value was incorrectly entered,
press the [C] (clear) key in the keypad, and then specify the correct value.
7 In the Basic screen, touch [Paper], and then select the paper tray loaded with the paper.
– If settings were specified in the 2/4/8 Repeat screen, touch [Zoom] in the Basic screen, and then
specify the zoom ratio setting.
8 Specify any other desired copy settings.
– To cancel the setting and select the default, press the [Reset] key.
9 Using the keypad, type in the desired number of copies.
10 Press the [Start] key.