Oce CS193 - Page 351

CS193/CS173/CS163 8-71
Application functions
8
3 Touch the button for the desired setting.
– To cancel the Image Adjust settings, touch [No].
– If a non-standard-sized original is loaded, the original size is not detected. Therefore, specify the
original size in the Custom Size screen, and then press the [Start] key.
4 Check the original size, and then touch [OK].
– If the original size cannot be detected automatically or to specify the original size, touch [Original
Size], and then specify the original size from any of the screens.
To cancel changes to the settings, touch [Cancel].
Original Size screen
Custom Size screen