Contents-2 CS193/CS173/CS163
2 Before making copies
2.1 Part names and their functions ...................................................................................................... 2-3
2.1.1 Options .............................................................................................................................................. 2-3
2.1.2 Outside of machine............................................................................................................................ 2-5
2.1.3 Inside of machine .............................................................................................................................. 2-9
2.1.4 Finisher FS-519/Output tray OT-602/Punch kit PK-515 ................................................................. 2-10
2.1.5 Saddle stitcher SD-505/Mailbin kit MT-502 .................................................................................... 2-12
2.1.6 Job separator JS-505...................................................................................................................... 2-14
2.1.7 Control panel ................................................................................................................................... 2-16
2.1.8 Basic settings screens..................................................................................................................... 2-18
2.1.9 Icons that appear in the screen ....................................................................................................... 2-20
2.2 Adjusting the angle of the control panel ..................................................................................... 2-21
2.2.1 To adjust the angle of the control panel .......................................................................................... 2-21
2.3 Turning on the main power and the auxiliary power.................................................................. 2-23
2.3.1 Turning on the machine................................................................................................................... 2-23
2.3.2 Scanning during warm-up ............................................................................................................... 2-24
2.3.3 Turning off the machine................................................................................................................... 2-25
2.3.4 Automatically clearing settings (automatic panel reset) .................................................................. 2-26
2.3.5 Automatically canceling the mode screen (System Auto Reset)..................................................... 2-26
2.3.6 Automatically conserving energy (Low Power mode)...................................................................... 2-27
2.3.7 Automatically conserving energy (Sleep mode) .............................................................................. 2-28
2.3.8 Manually conserving energy............................................................................................................ 2-28
2.3.9 Automatically turning the machine on/off (Weekly Timer) ............................................................... 2-29
2.3.10 Controlling each user’s use of this machine (User Authentication)................................................. 2-31
2.3.11 Controlling each account’s use of this machine (Account Track) ................................................... 2-35
2.3.12 Controlling use of this machine with authentication unit (biometric type)....................................... 2-38
When "1-to-many authentication" has been specified.................................................................... 2-38
When "1-to-1 authentication" has been specified .......................................................................... 2-39
2.3.13 Controlling use of this machine with the authentication unit (IC card type) .................................... 2-40
When "Card Authentication" has been specified ............................................................................ 2-40
When "Card Authentication + Password" has been specified ........................................................ 2-42
2.4 Loading paper into tray 1/2/3/4 .................................................................................................... 2-43
2.5 Loading paper into the LCT .......................................................................................................... 2-45
2.6 Loading paper into the bypass tray ............................................................................................. 2-47
3 Basic copy operations
3.1 General copy operation................................................................................................................... 3-3
3.2 Operations that cannot be combined ............................................................................................ 3-6
3.2.1 Operations where the setting specified last is given priority............................................................. 3-6
3.2.2 Operations where the setting specified first is given priority............................................................. 3-7
3.3 Feeding the original......................................................................................................................... 3-8
3.3.1 Loading the original into the ADF ...................................................................................................... 3-8
3.3.2 Placing the original on the original glass ........................................................................................... 3-9
3.3.3 Scanning the original in separate batches ("Separate Scan" setting)............................................. 3-11
3.3.4 Scanning a multi-page original from the original glass ................................................................... 3-15
3.4 Specifying original settings .......................................................................................................... 3-19
3.4.1 Specifying the original size (Original Size settings) ......................................................................... 3-19
3.4.2 Copying originals of mixed sizes ("Mixed Original" setting)............................................................ 3-21
3.4.3 Loading folded (Z-folded) originals.................................................................................................. 3-23
3.4.4 Selecting the original orientation (Original Direction settings)......................................................... 3-24
3.4.5 To select an Original Direction setting............................................................................................. 3-25
3.4.6 Selecting the position of the binding margin (Binding Position settings) ........................................ 3-27
3.4.7 To select a Binding Position setting ................................................................................................ 3-28
3.4.8 Reducing the effects of dust on the left partition glass................................................................... 3-30
3.4.9 Changing scan settings for each original ........................................................................................ 3-31
To Next Page
Loading...
