2
Before making copies
2-44 CS193/CS173/CS163
% Flatten the paper before loading it.
?
How many sheets of paper and other media can be loaded?
% Do not load so many sheets of plain paper that the top of the stack is higher than the , mark.
4 Close tray 1.
!
Detail
If special paper is loaded, the paper type setting must be specified. For details, refer to "Specifying a
setting for special paper" on page 7-17.
2
Reminder
Be careful not to touch the film.
For details on selecting the size and type of paper loaded in tray 1/2/3/4, refer to "Copy paper" on
page 7-3.
To print on OHP transparencies, thick paper 4, envelopes or postcards, use the bypass tray.
To Next Page
Loading...
