Contents-6 CS193/CS173/CS163
8.5 Inserting copies of a different original for a specified page
("Insert Image" function)............................................................................................................... 8-31
8.6 Specifying pages to be printed on the front side ("Chapters" function) .................................. 8-34
8.7 Scanning originals with different settings and printing copies all together
("Program Jobs" function) ............................................................................................................ 8-37
8.8 Copying with image colors inversed ("Neg./Pos. Reverse" function) ...................................... 8-41
8.9 Copying in a mirror image ("Mirror Image" function)................................................................. 8-43
8.10 Adding a background color to copies ("Background Color" function) .................................... 8-46
8.11 Adjusting the copy color quality (Color Adjust parameters) ..................................................... 8-48
8.11.1 To adjust the Color Adjust parameters............................................................................................ 8-49
8.11.2 Checking the print result of the Color Adjust settings (Sample Copy) ............................................ 8-51
8.12 Producing separate copies of each page in a page spread
("Book Copy" function) ................................................................................................................. 8-52
8.13 Tiling copy images ("Image Repeat" function) ........................................................................... 8-57
8.14 Copying an enlarged image on multiple pages ("Poster Mode" function)............................... 8-61
8.15 Copying booklets ("Booklet Original" function).......................................................................... 8-65
8.16 Adding a binding margin to copies ("Page Margin" function)................................................... 8-67
8.17 Adjusting the image to fit the paper (Image Adjust settings).................................................... 8-70
8.18 Copying with the page layout of a booklet ("Booklet" function)............................................... 8-73
8.19 Erasing specified areas of copies ("Frame Erase" function)..................................................... 8-75
8.20 Printing the date/time or page number on copies
(Stamp/Composition functions) ................................................................................................... 8-77
8.20.1 Printing the date/time ("Date/Time" function).................................................................................. 8-78
8.20.2 Printing the page number ("Page Number" function)...................................................................... 8-81
8.20.3 Printing previously registered stamps ("Stamp" function)............................................................... 8-85
8.20.4 Printing copy protection text ("Copy Protect" function).................................................................. 8-89
8.20.5 Printing repeating stamps ("Stamp Repeat" function) .................................................................... 8-97
8.20.6 Printing the image scanned first overlapped by the remaining original pages
("Overlay" function)......................................................................................................................... 8-103
8.20.7 Saving a scanned image as a registered overlay ("Overlay" function) .......................................... 8-106
8.20.8 Using a registered overlay ("Overlay" function)............................................................................. 8-108
8.20.9 Printing a header/footer ("Header/Footer" function)...................................................................... 8-109
8.21 Saving the scanned original in a user box ("Save in User Box" function).............................. 8-111
9 Replacing toner cartridges and staple cartridges and emptying
punch scrap box
9.1 Replacing the toner cartridge......................................................................................................... 9-3
9.1.1 To replace the toner cartridge ........................................................................................................... 9-5
9.2 Replacing the waste toner box....................................................................................................... 9-7
9.2.1 To replace the waste toner box......................................................................................................... 9-9
9.3 Replacing an imaging unit ............................................................................................................ 9-11
9.3.1 To replace the imaging unit ............................................................................................................. 9-13
9.4 Replacing the staple cartridge ..................................................................................................... 9-17
9.4.1 To replace the staple cartridge in the finisher ................................................................................. 9-18
9.4.2 To replace the staple cartridge in saddle stitcher ........................................................................... 9-20
9.5 Emptying the punch scrap box..................................................................................................... 9-22
9.5.1 To empty the punch scrap box in the finisher................................................................................. 9-24
10 Care of the machine
10.1 Cleaning.......................................................................................................................................... 10-3
10.1.1 Housing............................................................................................................................................ 10-3
10.1.2 Original glass ................................................................................................................................... 10-3
10.1.3 Left partition glass ........................................................................................................................... 10-4
10.1.4 Control panel ................................................................................................................................... 10-4
10.1.5 Original pad ..................................................................................................................................... 10-5
10.1.6 Electrostatic charger wire ................................................................................................................ 10-5
To Next Page
Loading...
