4535 612 10261 HD11 Service Manual Page 137
CSIP Level 1 Performance Tests: Test and Inspection Matrices
NOTE A test can fail. If this happens, correct the problem, and retest. If test passes, put “P” or
“Pass” on the service record. If the test still fails, then indicate “F” or “Fail” (include the
last 5 digits of the serial number of the device that failed if the test results box indicates
a serial number is needed). If the problem cannot be fixed, or if the customer refuses a
repair, explain in the comments section of the service record why the product was still
in the Fail condition at the end of the service event.
Are all active components—the wheels,
brakes, rear door, peripheral strap, monitor
swivel, and keyboard up/down/swivel
working as intended?
Answer to question is “yes.”
If both answers are yes, the
cart passes.
Do all of the user interface controls work as
intended?
(keyboard, trackball, panel light, monitor
controls, and speakers)
Answer to question is “yes.”
(if so, perform the next
inspection)
C:P
or
C:F
(P = Pass, and F=Fail)
Table 6-1 HD11 System Test and Inspection Matrix (Continued)
Test Block
Name
(or Symbol)
Test or Inspection to Perform Expected Test Results
What to Record on
Service Record
To Next Page
Loading...
