VTrak E-Class Product Manual
330
PSU (Power Supply Units)
PSU is not inserted/has
been removed
A power supply unit is missing from the VTrak.
Reinstall the power supply unit.
PSU is off A power supply unit is present but turned off. Turn on
he power supply.
PSU is on Normal.
PSU is installed/
operational and turned on
Normal.
PSU is installed/
operational and turned off
A power supply unit is present but turned off. Turn on
he power supply.
PSU is malfunctioning
and turned on/off
Replace the power supply unit.
PSU 12V/5V/3.3V power
is out of the threshold
range
Replace the power supply unit.
PSU 12V/5V/3.3V power
is within the range
Normal.
PSU Fans
PSU fan has turned on. Normal.
PSU fan has turned off. Verify that the power supply is turned on. If the fan
still does not turn, replace the power supply. See
page 259.
PSU fan speed increased. Check the VTrak for overheating. See page 342.
PSU fan speed
decreased.
Temporary overheat condition was corrected.
PSU fan is malfunctioning Replace the power supply. See page 259.
PSU fan is functioning
normally
Normal.
PSU fan status is
unknown.
Check for airflow out of the power supply. If there is
none, check for proper installation and turn the power
supply on.
RAID Level Migration
RAID Level migration is
started
Result of settings or user action. Normal.
RAID Level migration is
completed
Normal.
Reported Event Corrective Action
To Next Page
Loading...
Need help?
General
