3.Appendices: SP Mode Tables
168
Auto Job Promotion locks the queue
Queue is not
locked after AJP
If this is 1, then after a job is stored using Auto Job Promotion, new jobs cannot be added to the queue
until the stored job has been completely printed.
Allow use of Auto Job Promotion if connected to an external
charge device.
Does not allow AJP
with ECD
If this is 0, Auto Job Promotion will be automatically disabled if an external charge device is
connected.
Note: We do not officially support enabling this switch (1). Use it at your own risk.
Job cancels remaining pages when the paid-for pages have
been printed on an external charge device
When setting 1 is enabled, after printing the paid-for pages on an external charge device, the job
that includes any remaining pages will be canceled.
This setting will prevent the next user from printing the unnecessary pages from the previous user's print
job.
Does not allow
interruption
0 (default): Print jobs are not interrupted. If a job is promoted to the top of the print queue, it will wait
for the currently printing job to finish.
1: If a job is promoted to the top of the queue, it will interrupt the currently printing job and start
printing immediately.
Switch for enabling or disabling Limitless Paper Feeding for
the Bypass Tray
When the Bypass Tray is the target of the Auto Tray Select and Any Size/Type is configured for the
Tray Setting Priority setting of the Bypass Tray, this BitSwitch can switch the behavior whether or not
Limitless Paper Feeding is applied to the Bypass Tray.* The default is Enabled (=0).
*Limitless Paper Feeding will try a matching tray of the next highest priority if a job specified to Auto
To Next Page
Loading...
Need help?
General
