4.Troubleshooting
59
Error codes
The meanings of error codes recorded after "error:" in the result file are as follows:
Error codes recorded during firmware update
The target application cannot be found.
Installation has already been requested.
Failed to put the application offline.
Version of the micro computer firmware is invalid.
File structure error (invalid file)
Error codes recorded during application update
The target application cannot be found.
The storage capacity is not enough.
The version of the Android application cannot be installed.
Failed to put the application offline.
*1 The error code recorded in the Access Log will be "223: machine-busy".
*2 If the error occurs during preparation for configuration change, it will not be recorded in the Access Log.
ï‚· If the preparation for configuration change (putting the application offline, authentication, file size check)
cannot be carried out, an error code is displayed on the screen. However, it is not recorded in the Access Log
as a firmware update/installation error.
Error codes recorded in the Access Log
Firmware update is prohibited.
Enable firmware update, and repeat the
To Next Page
Loading...
Need help?
General
