Ricoh M0A0 - Page 668

4.Service Tables
42
NML: With no ECM
Width and reduction
A4: A4 (8.3"), no reduction
B4: B4 (10.1"), no reduction
A3: A3 (11.7"), no reduction
I/O rate
0: 0 ms/line
5: 5 ms/line
10: 10 ms/line
20: 20 ms/line
25: 2.5 ms/line
40: 40 ms/line
 "40" is displayed while receiving a fax message using AI short protocol.
System Switch 01 - Not used (Do not change the factory settings.)
System Switch 02 (SP No. 1-101-003)
No
Function
Comments
0-
1
Not used
Do not change these settings.
2
Forced reset after transmission
stalls
0: Off
1: On
With this setting on, the machine resets itself automatically if a transmission
stalls and fails to complete the job.
3
Not used
Do not change these settings.
4
File retention time
0: Depends on User Parameter
24 [18(H)]
1: No limit
1: A file that had a communication error will not be erased unless the
communication is successful.
5-
7
-
Do not change this setting
System Switch 03 - Not used (Do not change the factory settings.)
System Switch 04 (SP No. 1-101-005)
No
Function
Comments
0-
2
Not used
Do not change these settings.
3
Printing dedicated TX parameters
1: Each Quick/Speed dial number on the list is printed with the dedicated