Ricoh M0A0 User Manual

4.Service Tables
65
0-3
Remote mode switch number
00-09 (0-9:HEX)
Enter the number to switch between TEL/FAX modes using the external phone.
4-7
Not used
Do not change the settings.
Communication Switch 06 - Not used (do not change the settings)
Communication Switch 07 - Not used (do not change the settings)
Communication Switch 08 - Not used (do not change the settings)
Communication Switch 09 (SP No. 1-104-009)
No
Function
Comments
0-
7
Minimum interval between automatic
dialing attempts
This value is the minimum time that the machine waits before it
dials the next destination.
Communication Switch 0A (SP No. 1-104-011)
No
Function
Comments
0
Point of resumption of memory transmission
upon redialing
0: From the error page
1: From page 1
0: The transmission begins from the page where transmission
failed the previous time.
1: Transmission begins from the first page, using normal
memory transmission.
1-
7
Not used
Do not change these settings.
Communication Switch 0B (SP No. 1-104-012)
No
Function
Comments
0-
3
Not used
Do not change these settings.
4
Printout of the message when
acting as a Transfer Station
0: Disabled, 1: Enabled
When the machine is acting as a Transfer Station, this bit determines whether
the machine prints the fax message coming in from the Requesting Terminal.
5-
7
Not used
Do not change the settings.
Communication Switch 0C - Not used (do not change the settings)
Communication Switch 0D (SP No. 1-104-014)
No
Function
Comments
0-
7
The available memory threshold, below
which ringing detection (and therefore
00 to FF (Hex), unit = 4 Kbytes
(e.g., 06(H) = 24 Kbytes)

Ricoh M0A0 Specifications

General

Brand	Ricoh
Model	M0A0
Category	All in One Printer
Language	English