5.Detailed Section Descriptions
122
the "From" or "Reply-to" field of the message). If there is an incomplete received message in the machine memory, it will
be erased.
The machine prints an error message when it fails to send the receive error notification after a certain number of
attempts.
The following types of files are judged to be abnormal if one or more of the following are detected:
1. Unsupported MIME headers.
Supported types of MIME header
Multipart/mixed, text/plain, message/rfc822 Image/tiff
US-ASCII, ISO 8859 X. Other types cannot be handled, and some garbage may
appear in the data.
Content-Transfer-
Encoding
Base 64, 7-bit, 8-bit, Quoted Printable
2. MIME decoding errors
3. File format not recognized as TIFF-F format
4. Resolution, document size, or compression type cannot be accepted
Remaining SAF capacity error
The machine calls the server but does not receive e-mail if the remaining SAF capacity is less than a certain value (the
value depends on IFAX Switch 08. The e-mail will be received when the SAF capacity increases (for example, after
substitute reception files have been printed). The error handling method for this type of error is the same as for
"Abnormal files".
If the capacity of the SAF memory drops to zero during reception, the machine operates in the same way as when
receiving an abnormal file (refer to "Abnormal files" above).
Secure Internet Reception
To enable password encryption and higher level security: User Tools> System Settings> File Transfer> POP3/IMAP4
Settings> Encryption (set to "On")
Transfer Request: Request By Mail
For details: Core Technology Manual – Facsimile Processes – Faxing from a PC – Internet/LAN Fax Boards – Transfer
Request
The fields of the e-mail and their contents are as follows:
E-mail address of the requesting terminal
Destination address (Transfer Station address)
From TSI (Fax Message No. xxxx)
To Next Page
Loading...
