Operation
R-Concept
6.3.2.2.6 Menu Service
Diagnosis
Teach in
Tuning
Hardware exchange
Software update
Data service
Error memory
For the operator, only the submenus "Version" and "Diagnostics" (see Chapter "Mal-
function and Remedies", See Page 460) are of importance in the service menu. The
Tuning and Teach-In submenus are only accessible if you enter a code.
DANGER
Access to these menus is locked by a specific code for safety reasons. If wrong set-
tings are made in these menus or the applicable safety regulations are not or not suf-
ficiently observed, then it may lead to extreme accidents with fatal injuries. In many
cases, severe damage may be caused to the machine, with the consequence of
expensive repairs or long periods of standstill. Access to these menus is therefore
authorised only with direct contact to the manufacturer by telephone or to people
expressly authorised for this purpose by the manufacturer.
126 / 546
To Next Page
Loading...