ROPA Maus 6 - Diesel Particulate Filter (DPF) Regeneration Applicable for D-Diesel Engine)

Operation
Diesel engine
6.7.4.1 Diesel particulate filter (DPF) regeneration applicable for
d-diesel engine)
To start DPF regeneration (High Idle Regeneration) open the main menu, "Special
Functions", "Diesel Engine Regeneration" submenu.
In the line "Start DPF regeneration manually", choose the "On" option.
F - v
O
O
G
F p v v y
O
p
If you need to avoid the higher exhaust gas temperature that occurs during regen-
eration, e.g. when entering a hazardous area, you can suppress regeneration. The
automatic and manual regeneration cannot be started and a running regeneration is
aborted. Activate the suppression only for the period of danger. As soon as you acti-
vate the regeneration suppression, the regeneration remains blocked even after the
engine restart. As a result, a large number of particles may quickly accumulate in the
diesel particulate filter.
The line "Remaining period manual DPF regeneration" shows in minutes the remain-
ing time, which the machine still needs to regenerate the diesel particulate filter.
The line "DPF zone" shows the current DPF zone in which the machine is now.
Start DPF regeneration manually
On
Suppress DPF regeneration
Off
Remaining period manually DPF regeneration
5
DPF zone
Zone 2
min
ADVICE
The manual DPF regeneration can be carried out in DPF zone 2 and DPF zone 3.
To suppress the automatic DPF regeneration, select the option "On" in the "Suppress
DPF generation" line.
182 / 546