Operation
Driving
6.9.1.3 Cruise control
In order to relieve the driver, the vehicle is equipped with a cruise control. Therefore,
only in the operating mode "Rabbit II", the driving speed may be preselected either by
pressing the gas pedal or by switching on cruise control.
6.9.1.3.1 Switching on cruise control
Cruise control may only be switched on if the following conditions are met:
operating mode "Rabbit II" switched on (displayed on the R-Touch)
left joystick console folded down,
driving speed higher than 10 km/h.
This is how you switch on cruise control:
– Set the driving speed using the drive pedal.
– Press the key (10) on the right joystick. The driving speed indicator on the R-Touch
(1) is green. Cruise control is switched on.
193 / 546
To Next Page
Loading...