Lists/Tables/Plans/Diagrams/Maintenance Verification
Lubricant specification table
9.4.6 Product Data Sheet ROPA gearFluid ATF
Properties
ROPA gearFluid ATF is a gear oil for automatic transmissions, gearboxes with multi-disc clutches and is
used as hydraulic oil in a wide range of applications. Gear changes are made smoother with special addi-
tives on the friction surfaces in the gearbox.
ROPA gearFluid ATF conforms to the General Motors ATF Dexron II D specification and is specified by major
motor vehicle manufacturers who use automatic transmission that require Dexron II D. ROPA gearFluid ATF
can also be used in automatic transmissions that conform to the Mercedes-Benz MB 236.1 specification.
Information on use
Different ATF oils are prescribed for automatic transmissions as well as torque converter and power shift
transmissions installed in vehicles due to different requirements on the friction value. Therefore, always fol-
low the manufacturer's instructions.
Description / specifications
General Motors Dexron II D
Ford Mercon
Usage recommendations
MAN 339 type V1 MB sheet 236.1 ZF000438
MAN 339 type Z1 Caterpillar TO-2 ZF TE-ML 04D, 14A
MAN 339 type L 2
Ropa item no. & container sizes See Page 508
Characteristics Test method ROPA gearFluid ATF
Paint dyed red
Density at 15°C g/cm³ DIN 51 757 0.871
Dyn. viscosity at -40°C (CCS) mPa s DIN 51 398 48,000
Kin. viscosity at 40°C mm²/s DIN EN ISO 3104 36.1
Kin. viscosity at 100°C mm²/s DIN EN ISO 3104 7.20
Viscosity index (VI) DIN ISO 2909 168
Flash point COC °C DIN ISO 2592 210
Pour point °C DIN ISO 3016 -48
All characteristic data are subject to production-related variations. We reserve the right to make
modifications to the technical data. For more information, see our Material Safety Data Sheet.
514 / 546
To Next Page
Loading...