Operation
Loading operation
6.14.12 Pickup rollers (drive F)
(See Page 256)
The pickup rollers have different tasks. They pick up the beets from the ground and
transfer them to the cleaner rollers. These forward the beets to the conveyor rollers
and simultaneously clean the pig tails of the pickup rollers.
The pickup rollers always move in working direction if the 4-part pinch rollers also
move in the working direction.
To switch on the pickup rollers (can be switched on jointly with the conveyor rollers),
press briefly the key (7) on the right joystick once.
If this key is briefly pressed again, the conveyor rollers/pickup rollers stop. If this key
is pressed and held pressed, then the rotating direction of the conveyor rollers/pickup
rollers is reversed.
272 / 546
To Next Page
Loading...