Operation
Loading operation
6.14.9 Infeed conveyor (drive C)
(See Page 256)
The infeed conveyor (1) moves the beets from the pickup to the recleaner. This drive
is switched on or off using the button (10) on the right joystick.
The infeed conveyor only runs when the recleaner is already running. If this drive is
stopped, all forward drives will also stop. This drive can not be reversed.
Infeed conveyor speed
The speed of the infeed conveyor can be adjusted in ten steps. Choose this function
with R-Select.
+ key = infeed conveyor faster
- key = infeed conveyor slower
266 / 546
To Next Page
Loading...