Operation
Driving
However, if you wish to reactivate the currently deactivated automatic feed switch-on,
please open the "Special functions” menu and select the "Feed automatic activation"
line.
B638 PS fuel pressure fine filter
Feed - automatic activation
Start central lubrication
Diesel engine regeneration
6.9.2.2 Driving backward in the operating mode "Turtle"
If reverse driving is activated via the key (3), then the icon appears on the terminal.
This key switches on the reverse drive direction of the traction drive for as long as the
key (3) is pressed. If the machine is driving forward during loading, then you can stop
this movement by pressing this key. When driving in reverse, the rotary wheel cannot
be used to control the speed. The machine always drives backwards at the maximum
possible speed.
In addition, the traction drive may be stopped as follows:
– By pressing the emergency stop switch
– By pressing the foot switch for driving direction
– By engage the parking brake
197 / 546
To Next Page
Loading...