ROPA Maus 6 - Automatic Reversing Function for All Roller Drives

Operation
Loading operation
6.14.13 Automatic reversing function for all roller drives
You can set the automatic reversing function in the menu "Basic settings" to "ON" or
"OFF" for all roller drives.
Main settings
Fuel reserve warning
AdBlue reserve warning
Reverse-automatic rollers
Reversing time of rollers
Left joystick keys 18+19
10
25
On
3
Residual beet pickup
%
%
s
The automatic reversing function detects blocks on all roller drives of the beet flow.
When the system detects a block, then the automatic reversing function immediately
stops all drives located in front of the blocked drive. Simultaneously, the traction drive,
if has been activated, is stopped.
The automatic reversing function now several times reverses the rotating direction of
the blocked drive (at maximum 5 times), until the block is overcome. Then, all drives,
including the traction drive, if has been activated, are automatically switched on again.
Shouldn't you succeed in releasing the blockage by reversing after five attempts, then
all drives are switched off.
274 / 546