Safety
General symbols and instructions
2.3 General symbols and instructions
The following symbols are used for safety instructions in this operating manual. They
serve as a warning against possible personal injury or material damage, or provide
help in facilitating work.
DANGER
This signal word warns of imminent danger of fatal accident or serious injury. This
hazard may always occur if the operating or working instructions are not or only
imprecisely observed.
WARNING
This signal word warns you of a possibly dangerous situation which may lead to
serious injury or to death. This hazard may always occur if the operating or working
instructions are not or only imprecisely observed.
CAUTION
This signal word warns you of a possibly dangerous situation which may lead to seri-
ous injury or to death and damage to the machine or other serious property dam-
age. Non-observance of these instructions may lead to loss of warranty. This hazard
may always occur if the operating or working instructions are not or only imprecisely
observed.
ATTENTION
This signal word warns you of a possible severe damage to the machine or other
severe property damage. Non-observance of these instructions may lead to loss of
warranty. This hazard may always occur if the operating or working instructions are
not or only imprecisely observed.
ADVICE
This symbol draws your attention to some special aspects. This helps to facilitate
work.
Item numbers
The item numbers used in drawings are put in text in parentheses (1) and marked in
bold.
Operational activities
The defined sequence of operational activities facilitates the correct and safe use of
the device.
24 / 546
To Next Page
Loading...