Maintenance and Service
Axles
7.6.2 Differential gears on front and rear axle
The first oil change is required after 50 operating hours, further oil changes must be
performed annually.
Front axle
(1) Oil drain screw
(2) Oil filling opening and oil level control screw
Rear axle
DANGER
Injury hazard!
Hazard to life due to moving machine parts.
– Before oil change, each time stop the machine and switch off the engine.
– Secure the diesel engine against accidental start-up, keep the ignition key out of
reach of any third party!
– All maintenance and repair work may only be performed by trained personnel.
391 / 546
To Next Page
Loading...