Maintenance and Service
Infeed conveyor
Synchronism
If the infeed conveyor is severely one-sided on the side flange of the drive wheels, it
can be synchronised by moving the oil engine bracket (4) or drive shaft (3).
7.10.2 Replacing infeed conveyor drive wheels
ATTENTION
Replace drive wheels when required, do not wait until the unloading conveyor belt
jumps off!
Check the drive wheels for wear at least once a week. Extremely worn drive wheels
lead to premature wear of the infeed conveyor belt.
Service life: depending on soil conditions every 60,000 - 140,000 t of loading.
410 / 546
To Next Page
Loading...