ROPA Maus 6 - Driving into the Beet Pile - Loading Mode START

Operation
Loading operation
6.14.14 Driving into the beet pile – Loading mode START
If a truck is not ready for loading under the truck conveyor, before switching on the
machine drive set the selection in the "LOAD MODE" line from "LOAD" (default set-
ting) to "START".
ADVICE
Similarly, you can turn on the "START" loading mode via the quick access window
(See Page 114).
6
This allows the machine to drive into the beet pile with the pickup running without dis-
turbing the remaining beet path. As soon as the machine drive is switched off (yellow
key (6) on the right joystick), the load mode is automatically reset to "LOAD".
Special functions
B638 PS fuel pressure fine filter
Service fuel filter
Load mode
Feed - automatic activation
Start central lubrication
Greasing time
Diesel engine regeneration
4000 mbar
Off
Start
Off
Off
190 sec
(1) Status symbol loading mode "START"
276 / 546