Operation
Loading operation
6.14.9.1 Infeed conveyor fast motion
Sometimes, a larger quantity of dirt sticks mainly in the section of the infeed and the
deflection rollers of the infeed conveyor. This usually happens when loading under
very unfavourable conditions. To be able to fling this soil off the conveyor, the infeed
conveyor is equipped with a quick motion switch.
You can switch on quick motion using the toggle switch (33). For this purpose, move
this switch to the left and hold it for so long, until soiling is removed. The infeed con-
veyor then runs at double speed.
Only switch on quick motion when the infeed conveyor is empty and there are no
beets are on the infeed conveyor.
Briefly switch on quick motion if a "roll" made of soil and other contamination develops
in the section behind the deflecting roller. Quick motion removes this roll of dirt as long
as it does not exceed a specific size. Otherwise, the dirt must be removed manually.
If the recleaner is blocked, then the infeed conveyor automatically shuts off. As soon
as a blockage of the recleaner has been removed, the infeed conveyor can be started
again by briefly pressing on the button (10) on the right joystick.
267 / 546
To Next Page
Loading...