Safety
Hazards caused by electricity
2.14 Hazards caused by electricity
DANGER
Danger of death due to electric voltage.
Cables and components are live, there is a danger of injury with deadly conse-
quences. Clamping points are under voltage also after shut-off.
– All work on the electrical equipment of the machine must always be carried out by
qualified electricians.
– Check electrical equipment on a regular basis: refasten loose connections and
replace damaged lines and cables immediately.
There is an electrical hazard during work on the machine:
During direct contact with live parts or parts that have become energized due to
fault conditions.
By electrostatically charged parts.
During all work on live parts, lines or cables, a second person must be present,
who turns off the main switch in an emergency case.
Never clean electrical equipment with water or similar liquids.
Do not touch live parts inside and outside the machine.
Before beginning work on the machine, switch it off at the main switch, make sure
that no voltage is present and secure it from unintentional restart.
Before opening cabinets and devices, discharge all parts that collect electrical
charge, and make sure that all components are de-energized.
34 / 546
To Next Page
Loading...