Maintenance and Service
Air conditioning and ventilation system
7.15.2 Driver's cabin recirculating filter
The recirculating filter (2) for the driver's cabin is located on the right outer side of the
rear wall of the driver's cabin.
This filter must be cleaned in case of
need. For this purpose:
– Lower the driver's cabin completely
and loosen both wing nuts (1) of the
cover, open the cover downwards.
– Pull the recirculating filter (2) down-
ward by the flap (3).
– Blow out recirculating filter using com-
pressed air.
– Reinsert the cleaned recirculating fil-
ter. Pay attention to the flow direction.
The printed arrow (4) on the filter must
point to the rear of the machine.
– Close the cover and fasten it with the
two wing nuts (1).
This filter element (ROPA
item no. 352042200) should be renewed
once a year in any case.
428 / 546
To Next Page
Loading...