ROPA Maus 6 - Replacing the Fingers of the Pickup Rollers

Maintenance and Service
Pickup
7.8.4.2 Replacing the fingers of the pickup rollers
The pickup rollers are fitted with wear plates on the pickup fingers (ROPA
item no. 208003800). Hard-metal plates are soldered to the wear plates.
The wear plates are fastened with screws, which allows every single wear plate to be
replaced individually quickly and without difficulty once it has become worn.
Pickup finger with wear plate
DANGER
Danger of serious injury when working on the fingers of the pickup rollers.
– Before maintenance and repair work, the machine must be shut down and the
diesel engine switched off.
– Secure the diesel engine against accidental start-up, keep the ignition key out of
reach of any third party!
400 / 546