Lists/Tables/Plans/Diagrams/Maintenance Verification
Lubricant specification table
9.4.3 Product Data Sheet ROPA engineOil E7+ 10W-40
Properties
ROPA engineOil E7+ 10W-40 is a UHPD low-viscosity engine oil for commercial vehicles. The SAE 10W-40
year-round range of viscosity preferred by the engine manufacturers can be achieved thanks to the use
of special base oils and innovative additives. At very low outside temperatures, the SAE 10W cold viscos-
ity ensures reliable cold starts (low cold start wear) and the fastest possible supply to all lubrication points.
Extreme loads are safely mastered due to the high temperature viscosity SAE 40. Friction losses and wear
are significantly reduced. Efficiency is significantly improved due to low oil and fuel consumption and longer
oil change intervals, even under severe conditions.
Information on use
ROPA engineOil E7+ 10W-40 was developed for the efficient care of commercial vehicle and stationary
diesel engines, even under extreme loads. It exceeds all the requirements for a modern high-performance
engine oil for vehicles of various types in agriculture, construction and commercial vehicle fleets.
ROPA engineOil E7+ 10W-40 is a high-performance diesel engine oil that can be used year-round and is
recommended for use in Euro III - Euro VI diesel engines. Due to its low ash content this product can be
used in a wide variety of exhaust aftertreatment systems.
Description / specifications SAE class 10W-40
ACEA E4/E7
API CI-4
Approvals MB-approval 228.5
Volvo VDS-3 (STD 417-0002)
Usage recommendations
MAN M 3277 MTU MTL 5044 type 3
Ropa item no. & container sizes See Page 508
Characteristics Test method ROPA engineOil E7+ 10W-40
SAE class SAE J 300 10W-40
Density at 15°C g/cm³ DIN 51 757 0.869
Dyn. viscosity at -25°C (CCS) mPa s ASTM D 5293 5.770
Kin. viscosity at 40°C mm²/s DIN EN ISO 3104 96.8
Kin. viscosity at 100°C mm²/s DIN EN ISO 3104 14.5
Viscosity index (VI) DIN ISO 2909 156
Flash point COC °C DIN ISO 2592 236
Pour point °C DIN ISO 3016 -42
Base number mgKOH/g DIN ISO 3771 12.7
All characteristic data are subject to production-related variations. We reserve the right to make
modifications to the technical data. For more information, see our Material Safety Data Sheet.
511 / 546
To Next Page
Loading...