ROPA Maus 6 - Fast Speed Sieve Conveyor Cleaning

Operation
Loading operation
6.14.8.1.1 Fast speed sieve conveyor cleaning
Sometimes, a larger quantity of soil sticks to the conveyor, e.g. when loading under
unfavourable conditions. The sieve conveyor cleaning is fitted with a fast speed switch
to allow this soil to be thrown off the conveyor.
Load mode
Feed - automatic activation
Start central lubrication
Loading
Off
Off
Greasing time
210 sec
Start DPF regeneration manually
Off
Suppress DPF regeneration
Off
Remaining period manually DPF regeneration
0 min
Special functions
DPF zone
Zone 0
Fast speed sieve conveyor
On
Open the "Sieve conveyor fast speed" line in the "Special functions" menu and set the
selection to "ON". The speed of the sieve conveyor is doubled. Set the value back to
"OFF" as soon as the soil has been cleared.
Switch on the fast speed only when the conveyor is empty and there are no beets on
the conveyor chain.
263 / 546