Operation
R-Concept
(12) Day of week
(13) Switch-on time - hours
(14) Switch-on time - minutes
(15) Runtime after activation
By swiping up and down on the terminal, you can set the time and day of the week
when the parking heater should be switched on. The parking heater can be set for
maximum a week in advance.
The park heating automatic function is activated by pressing the screen button (11).
The park heating then switches on automatically at the set time and is active for the
set runtime from 30 to 120 minutes. In the climate control menu, the button (10) indi-
cates whether it is active.
ADVICE
The main battery switch must not be shut off while park heating is on, unless there is
immediate danger. In this case the heater will be switched off without a cooling down
period (risk of overheating!).
138 / 546
To Next Page
Loading...