Operation
Loading operation
The driver's seat must be occupied, See Page 80.
Rotate the driver's seat to the forward direction. First sound the horn briefly to notify all
people in the vicinity that the machine drive is being started and they must keep clear
of the machine.
Press the yellow key (6) only briefly to switch on the machine drive.
Safety circuit when switching on the machine drive
The driver's seat is equipped with a position sensor. That's why, the machine drive can
only be switched on with the yellow button (6) if the driver's seat is centred and turned
forward and if you had an overview of the pickup. The rotating seat status indicator
(1) on the R-Touch should turn green. In addition, the pile pickup must be raised high
enough so that no error message related to the pile pickup is displayed.
(2) Indicator for expiration of cooling-off period
(3) Indicator for expiration of cooling-off period (22 seconds remaining)
If the transport vehicles need to be exchanged rapidly, the machine drive can be
switched on again without turning the driver's seat into the green zone. This is possible
as long as the waiting period, counted down on the R-Touch starting from the switch-
off time of the machine drive, has not expired.
The waiting period (3) covers the display of the current flow volume of the scale (only
with optional scale).
Recommendation for fuel-saving loading:
Use the X-Y key (16) to select an engine rotational speed between
1,200 and 1,300 rpm.
250 / 546
To Next Page