Operation
Loading operation
Recleaner speed
The rotational speed of the recleaner may be set to one of 10 stages. Choose this
function with R-Select.
+ key = more aggressive recleaning
- key = gentler recleaning
Only with 8-set pinch roller recleaner:
If the key + is released after the stage 10 is reached and then pressed for at least
three seconds, the "Max" stage is reached. The highest hydraulic drive speed is
achieved in the "Max" stage.
ADVICE
To treat the beets as carefully as possible, the speed of the recleaner should not be
selected higher than necessary. The "Max" stage should only be used in case of
extremely sticky soil.
If this drive is stopped, all forward drives will also stop.
261 / 546
To Next Page
Loading...