Maintenance and Service
Diesel engine
When R-Touch displays the warning icon "Cooling water temperature" , the cooling
system must be cleaned immediately.
The coolant in the coolant circuit of the diesel engine may not exceed the permissible
temperature of 105 °C.
DANGER
Hazard of extremely severe injuries due to starting infeed conveyor
– Before maintenance and repair work, the machine must be shut down and the
diesel engine switched off.
– Secure the diesel engine against accidental start-up, keep the ignition key out of
reach of any third party!
Proceed on the cleaning of the cooling system as follows:
– Fold down the rear platform wall (4).
– Release the rubber closures (6) on the intake grid.
– Swing up the intake grid (5).
– Clean the intake grid from the collected dirt with the brush and, if necessary, with
the water stream from the water hose.
(5) Intake grid
(6) Front rubber fastener
359 / 546
To Next Page
Loading...