Rovema CMK Operator’s Manual
Section 6: Operating Procedures
200246 CMK Operators Manual (02/06/2006) 6-7
Shut Down the Machine
Use the following procedures to stop or shut down the machine.
Normal Stop
Press the STOP push-button to halt the machine under normal conditions.
Extended Shutdown
Use the following procedure to shut down the machine for extended periods of time.
1. Press the STOP push-button to halt production.
2. Turn the Main Electrical Disconnect switch to the OFF position.
3. Turn the Air Disconnect handle to the OFF position to shut off the air supply
to the machine.
4. Clean the machine by following the maintenance procedures outlined in the
Maintenance Procedures section of this manual.
Safety devices must not be bypassed or disabled!
Repairs may only be performed with the master switch
OFF!
To Next Page
Loading...
