ROVEMA CMK - Front Flap Closers

Rovema CMK Operator’s Manual
Section 4: Parts and Functions
200246 CMK Operators Manual (02/06/2006) 4-14
Carton Conveyor
Front Flap Closers
After the cartons have been erected, the cartons must be closed. Disks are
designed to insert both of the side flaps. A disk like this is installed on both the
top and base flaps for the carton.
The cartons move along the conveyor and the front flaps are pushed against the
rotating disk to close the flap.
Figure 4.15
Shows the front flap closer.
Front
Flap
Front
Flap