Rovema CMK Operator’s Manual
Section 5: Operator Controls
200246 CMK Operators Manual (02/06/2006) 5-4
Parameters and Submenus
Parameters and Submenus
The settings of the parameters, for each submenu screen, control all of the
machine’s forming operations. Some of the parameters enable or disable an
operation. Others determine when an operation will occur during the loading cycle.
The parameter descriptions of each submenu are described on the Parameters
Charts following the screen pictures.
Figure 5.4
Shows the settings on the Main Parameters screen.
Parameters
Submenus
To Next Page
Loading...
