Rovema ULF Operator’s Manual
Section 2: Safety Instructions
200246 CMK Operators Manual (02/06/2006) 2-7
Safety Devices
Dangerous Areas
Guard Doors
The dangerous areas of the machine are protected with
protective doors. These protective doors are connected to
safety switches.
As soon as one safety door is opened, the safety chain will be
interrupted.
When the protective doors are opened, all drives will
immediately be stopped and the electric circuit interrupted.
Observe the warnings on the protective doors!
Figure 2.2
Guard Door Safety Switch
Changes and Modifications
Modifications, such as cutting holes in protective doors, should only be performed
when the user ensures that all safety regulations are followed.
All modifications on safety devices must be documented and confirmed by a
responsible specialist.
ROVEMA can make available safety devices in conformity with the customer's
specifications.
To Next Page
Loading...
