ROVEMA CMK - Tensioning Upper Conveyor (Barrel Loader) Chains

Rovema CMK Operator’s Manual
Section 7: Working with Components
200246 CMK Operators Manual (02/06/2006) 7-31
Barrel Loader
Tensioning Upper Conveyor (Barrel Loader) Chains
Tension adjustment mechanisms are provided for both chains of the upper
conveyor.
To Tension the Upper Conveyor Chains:
• Loosen lock nut (3).
• Adjust tension screw (2).
• Tighten lock nut (3).
NOTE: The tension must be the same on both chains. Otherwise the
insertion slides will not be in a straight line.
Figure 7.23
Tensioning the Barrel Loader