Rovema ULF Operator’s Manual
Section 2: Safety Instructions
200246 CMK Operators Manual (02/06/2006) 2-4
Component Safety
Electrical and Control System
No modifications or changes in the electrical and control system are allowed.
All retrofits and modifications must be performed only by ROVEMA.
Spare Parts
Only original ROVEMA spare parts and accessories should be
used.
ROVEMA is not liable for any damage caused due to the use
of foreign products.
Maintenance
Before starting any cleaning, maintenance and repair procedures, be sure that the
main switch is turned OFF, and make sure that it cannot be turned ON again.
Use only cleansing agents that would not cause damage to mechanical or electrical
equipment. (For details concerning cleansing agents, refer to Section 6:
Maintenance.)
Machines used for packaging foodstuffs should be treated with
special cleansers or disinfectants in accordance with the
existing hygienic prescriptions of the country in which the
machine is installed. For more detailed information, please
contact the appropriate authorities of your country.
To Next Page
Loading...
