Rovema CMK Operator’s Manual
Section 7: Working with Components
200246 CMK Operators Manual (02/06/2006) 7-18
Drive Chain
Tension Drive Chain Drive Belt
The toothed belt for the driver chain drive runs through a deflection mounted on a
clamping disk. The deflection is caused by two toothed disks. Loosening the
tension disk and turning it in the direction of the arrow makes the path of the
drive belt through the deflection longer, which increases the tension of the belts.
After the clamping disk has been adjusted, tighten the fastening bolts again.
Figure 7.10
Chain Drive Belt
Bolt
Belt
Clamping
Disk
Disk
To Next Page
Loading...
